patent numbers 5713755 5961339 do not scale from this print clt-1xx-02-xx-d-xx -02 thru -50 row spec. -d double row (use clt-xx-d except for -be option) lead style -f: flash selective, 3 au / 50 ni min on contact, matte tin tail -l: light selective, 10 au / 50 ni min on contact, matte tin tail -g: gold, 10 au / 50 ni min on contact, 3 au / 50 ni min on tail -s: selective, 30 au / 50 ni min on contact, matte tin tail (use c-114-22-s only) -h: heavy gold, 30 au / 50 ni min on contact, 3 au / 50 ni min on tail -fm: flash selective, 3 au / 50 ni min on contact, matte tin tail -lm: light selective, 10 au / 50 ni min on contact, matte tin tail -sm: selective, 30 au / 50 ni min on contact, matte tin tail option -p: pick & place pad available on positions 04 thru 50 only (see fig. 2, sht 2. use lmp-03) -tr: tape and reel packaging (02 thru 36 pos only) -be: bottom entry (see fig. 6, use clt-xx-d-be-xx) -a: alignment pin (molded or staked) (see figs. 3 & 4, sht 2) (staked min 5 pos) (molded min 3 pos) -k: polyimide film pad (available on pos. 4 thru 50 only) (.005 [.13] thickness with silicone adhesive)(see fig 5, sht 2) (use k-500-300) plating specification no of pos. per row -02: surface mount (see table 1) .0835 2.12 ref clt-xx-d-xx fig 1 (cut to position) see note 4, 9, 10 (no. of pos. x .0787[2.00]) .005[.13] .0200 x .0050[.127] ref 0.51 (see note 10) .1575 ref 4.00 (no. of pos x .07874[2.00]) - .07874[2.00] ref .07874 ref 2.00 2.5 max sway (any direction) "a" "a" c l c see table 1 (see note 11) fig 6 -be option (same as fig 1 except insulator) .024 sq ref 0.61 .090 .002 2.27 0.05 (measure at bend) .203 .010 5.15 0.25 (see note 6) +4 -3 section "a"-"a" scale 4 : 1 c l burr side (see note 8) c see note 2 -p option w/o -a option all options except -p option w/o -a option positions 04 - 50 see note 11 use tp-12 plugs packaging views (see note 5) pt-clx002-d c br sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 10 .xxx: .005 [.13] .xxxx: .0020 [.051] 2mm low profile socket strip by: clt-1xx-02-xx-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 10/03/1994 2 1 sheet scale: 2:1 f:\dwg\misc\mktg\clt-1xx-02-xx-d-xx-mkt.slddrw notes: 1. c represents a critical dimension. 2. coplanarity to be .004 for positions 2-25, .006 for positions 26-34, and .008 for 35-50. 3. minimum pushout force: .5 lb. 4. will lose a position for every cut made on a socket strip. 5. all options:package positions -04 thru -50 in pt-clx002-d tube as shown in views, with two tp-12 plugs per tube. layer package positions -02 & -03. 6. shear tails to dimension shown. 7. parts to be symmetrical about c l 8. .005 max. burr. 9. cut flash to be .010 [.25] max with no flash allowed in holes or extending below leads 10. standard body endwall after cutting: .0215 min. 11. -be body endwall after cutting: .0169 .003 [.429 .08] 12. c-114-02 can be used for c-114-22. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 material: insulator: lcp, ul 94 vo, color black contact: phos bronze revision br
* = for -be option only * = for -be option only .098 2.48 .225 5.72 fig 2 -p: pick & place pad (4 pos min) c l lmp-03 c .202 ref 5.13 c l ((no. of pos -2) x .0787[2.00]) .005 c l fig 3 -a option (staked) (5 pos min) clt-xx-d(-be * ) c .035 0.89 .030 ref 0.76 .025 ref 0.64 2 max toe (any direction) sm-a7h c (no. of pos. - 2) x .0787[2.00] ref clt-xx-d(-be * ) fig 4 -a option (molded) (3 pos min) c .0235 ref 0.597 .025 ref 0.64 (see note) "m" .020 .010 0.50 0.25 .1969 .0050 5.001 0.127 (see note) "p" c l c .095 2.400 note: "m" = used measured dimension (ref) "p" = (("m" - .1969 [5.00]) / 2) .020 [.51] fig 5 -k option (4 pos min) sheet of 2mm low profile socket strip by: clt-1xx-02-xx-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 10/03/1994 2 2 sheet scale: 4:1 revision br f:\dwg\misc\mktg\clt-1xx-02-xx-d-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
